BRIGGS STRATTON 297594 Nos Magneto Coil

( Brand: Briggs Stratton ), ( Manufacturer Part Number: 297594 ), ( Model: BRIGGS AND STRATTON 297594 ), ( Part Type: Magneto Coil )

Review BRIGGS STRATTON Nos And Magneto Coil Genuine Oem Replacement Part

The Briggs & Stratton 297594 NO S Magneto Coil is a crucial component for the ignition system of certain Briggs & Stratton engines. This magneto coil is designed to produce a high voltage spark that ignites the fuel-air mixture in the engine cylinder.

The coil is constructed with a robust and durable iron core, which is wound with a fine copper wire. The insulation on the wire is designed to withstand the high electrical stresses generated during the sparking process. The coil is sealed in a protective rubber housing, which helps to prevent damage from external elements and ensures a long service life.

The Briggs & Stratton 297594 NO S Magneto Coil is specifically designed for use with engines that utilize the NO S (No Spark) ignition system. This system uses a magneto to generate the high voltage spark, rather than the more common distributor ignition system. The use of a magneto coil in an NO S ignition system simplifies the engine design and eliminates the need for a distributor and rotor.

Installation of the magneto coil is a relatively straightforward process. The coil is connected to the engine's ignition system using two wires, typically marked with red and black insulation. The red wire connects to the positive terminal of the ignition system, while the black wire connects to the negative terminal. The coil is typically mounted in a convenient location near the engine, such as on the side or top of the engine block.

It is important to note that the Briggs & Stratton 297594 NO S Magneto Coil is a replacement part and is intended for use in engines that require this specific type of ignition system component. If you are unsure about the type of ignition system your engine uses, or if you have any questions about the installation process, it is recommended that you consult the engine owner's manual or contact a qualified small engine mechanic for assistance.

Overall, the Briggs & Stratton 297594 NO S Magneto Coil is a reliable and effective solution for replacing a worn-out or failed magneto coil in an NO S ignition system engine. Its durable construction, easy installation, and high-performance design make it an excellent choice for maintaining the optimal performance of your Briggs & Stratton engine.

Briggs & Stratton 297594 NOS Magneto Coil: A Detailed Analysis

The Briggs & Stratton 297594 NOS (New Old Stock) magneto coil is a replacement part designed for Briggs & Stratton engines. This coil is crucial for the ignition system and can be an essential purchase for engine owners. In this analysis, we will discuss the pros and cons of buying this magneto coil.

1. High-Quality Product: This NOS magneto coil from Briggs & Stratton is a genuine replacement part. It is manufactured using the same specifications as the original coil, ensuring reliable performance.

2. Ensures Proper Ignition: A faulty magneto coil can cause engine misfires or even prevent the engine from starting. By replacing the faulty coil with a new one, you can restore the engine's proper ignition and ensure reliable performance.

3. Long-Lasting: NOS parts are known for their longevity, as they have been stored in controlled environments and have not been subjected to wear and tear. This magneto coil is no exception, and it can provide long-lasting service.

4. Easy Installation: Installing this magneto coil is a straightforward process. It is designed to fit seamlessly into the engine, and the installation instructions provided by Briggs & Stratton make the process hassle-free.

1. Cost: The Briggs & Stratton 297594 NOS magneto coil is a premium replacement part, and its price reflects its high quality. This might be a significant investment for some engine owners.

2. Limited Availability: NOS parts, in general, have limited availability. You may have to search extensively to find a supplier that stocks this particular magneto coil.

3. Potential for Unused Parts: Since this magneto coil is NOS, it has not been used before. However, there is a risk that the coil might have deteriorated during storage, even though it is new.

The Briggs & Stratton 297594 NOS magneto coil is a high-quality replacement part that can ensure reliable ignition in Briggs & Stratton engines. Its long-lasting nature and easy installation make it an attractive option for engine owners. However, its cost and limited availability might be a concern for some. Ultimately, if you need a reliable magneto coil for your Briggs & Stratton engine and are willing to invest in a premium replacement part, the 297594 NOS magneto coil is an excellent choice.

If you are in the market for a new magneto coil for your Briggs & Stratton engine and prioritize reliability, longevity, and ease of installation, the Briggs & Stratton 297594 NOS magneto coil is an excellent choice. However, before making a purchase, ensure that you have confirmed the compatibility of this part with your engine model and that you have sourced it from a reputable supplier to ensure its authenticity.

Details:

Most new products in a box I open to inspect the item and give you more photos. Have any parts inspected my a mechanic prior to use or install. NOS Briggs and Stratton magneto 297594. Its been sitting on a dry shelf for decades.

This lowers my total cost saving you your hard earned money. I am not an expert and do have access to specific manufacturer information. Item shows minimal age. Item is old and I opened the box from factory seal for pictures.

part #: 297594 prices

• $69.99-$85.00

specifications vintaequip:

• brand: Briggs Stratton
• mpn: 297594
• model: Briggs And Stratton 297594
• part type: Magneto Coil

seller vintaequip:

• rating: 100.0%
• # reviews: 332
• city: Fayetteville, North Carolina

returns vintaequip:

• time: 30 Days
• paid by: Seller
• policy: Returns Accepted
• method: Money back

shipping vintaequip:

• type: Calculated
• transit: 3-7 Days
• class: Standard
• service: USPS Ground Advantage
• cost: $0.00
• carrier: USPS

general vintaequip:

• condition: New Open box
• Heavy Equipment, Parts Attachments > Heavy Equipment Parts Accessories > Antique Vintage Equipment Parts

offer vintaequip:

• sold: 0
• availability: In Stock
• options: Ship-to-home
• best offers: True
• quantity: 1
• started: October 28, 2025

payments vintaequip:

• credit card: Mastercard
• other
• wallet: Google-pay

Briggs Stratton 297594 Is Similar To:

• Briggs Stratton 292096 Original And Piston Ring Set (55.1% similar) New oem Briggs Stratton piston ring set std 292096...(January 23rd, 2025)
• Briggs Stratton 298514 Genuine And 7hp Engines 692265 (51.2% similar) For faster service, include the equipment model number, serial number and year in your message. For example, chain saw bar size, size and many other custom features of your model equipment can change the standard fitment information. Custom chainsaw parts. For these reasons and many more, this...(February 21st, 2025)
• Briggs Stratton 710113 Oem And Air Cleaner Knob (43.9% similar) I am in the process of moving. Items over 1LB may be shipped via ups ground and FedEx. I will beat out any competitors pricing for the exact same item. Priority shipping will only be applied if package is over 1LB. Physical pickup is permitted, please message me to arrange a before...(April 11th, 2025)
• Briggs Stratton A1053 Original Basco Locking Gas Fuel Cap Key (32.1% similar) Part #: Briggs Stratton A1053 for sale...(May 25th, 2025)
• Briggs Stratton C250b Original And Basco Locking Gas Fuel Cap Key (51.1% similar) Part #: Briggs Stratton C250B for sale...(May 25th, 2025)
• Szlyyds 19061 590607 797276 Pull Start Assembly Recoil Starter For Briggs And Stratton 5hp (23% similar) Manufacturer: eon. It is built to withstand the demands of regular use and provide long-lasting performance. Country of origin: china. It is also a suitable replacement for craftsman 196CC 208CC. Item model number: 19061. Wide compatibility this pull start assembly for Briggs and Stratton...(June 1st, 2025)
• Zntvw 295871 Recoil Starter Pulley Compatible With Briggs And Stratton Fit For Most 5 (27.7% similar) Manufacturer: centavo.: package dimensions: 7.2 x 5.47 1.46 inches; 4.16 ounces. Features: material: made of highly durable material for long time using. Why need this: if your old pulley is cracked or has been used for many years, you should replace it in time to ensure safety and...(June 2nd, 2025)
• Venseri 497680 Recoil Starter Assembly For Briggs And Stratton 6.75 Motor 498144 (31.2% similar) Item dimensions l x w h: 3.15 2.76 3.54 inches. Wattage: 1.1 kw. Country of origin: china. Product dimensions: 3.15 x 2.76 3.54 inches; 15.52 ounces. 497680 recoil starter assembly for Briggs Stratton 6.75 motor 498144 rewind pull start Toto 2001 0 2001 1 2002 1 2002 3 2002 5 2002 7 2003 0...(June 2nd, 2025)
• Briggs Stratton 1101695 Shroud Pulley Belt 12v Starter Generator 1971 And Engine 191701 (38% similar) Shroud, belt, pulley, starter cup, screen, etc...(June 12th, 2025)
• Briggs Stratton 796608 And Carburetor (53.1% similar) Shipping costs vary depending on the size and weight of package destination. Fits most 1110 11P0 1210 12Q000 model Briggs Stratton engines. About this item: Briggs Stratton 796608. Briggs Stratton 796608 carburetor. Useful links. Founded on the principles of innovation and...(July 16th, 2025)
• Briggs Stratton 7078078yp New And Control Zone Cable (54.7% similar) Never installed...(July 30th, 2025)